Country Walk Cobalt Epoxy Flooring is a flooring contractor coating, polishing and resurfacing concrete in The Crossings, FL. We test and prep each slab before we coat garages, patios, pool decks and shop floors here.
The Crossings is a short drive from our base in Country Walk, and most of what we work on here is houses and townhomes sitting on concrete slabs, with attached garages, back patios and a fair number of pool decks, plus some small shops and offices along the main roads. A lot of these homes have been around for a few decades, so the garage slab usually carries old paint, oil stains or a sealer somebody rolled on years back. The calls look a lot like the ones we get next door in Kendale Lakes.
The ground here is low and wet like everywhere around us, so moisture coming up through the slab is the first thing I test for, because a coating laid over a damp slab will lift no matter how good it looked on day one.
We grind the slab open, fill the cracks and lay epoxy down in layers, and how the room gets used decides the build, color and flake.
Explore serviceShop and warehouse owners want a floor that takes forklifts, spills and hard cleaning, so we plan coating thickness and cure time around your downtime.
Explore serviceMost garages we see here carry oil stains and peeling paint, so we strip and grind first, then build a coating that stands up to hot tires.
Explore servicePolyaspartic cures fast and holds its color in the sun, which suits patios and garages, but it sets quickly, so it only goes on a dry slab.
Explore serviceIf you want a showroom or living-space look, metallic epoxy swirls pigment through the coat, and how flat the slab is underneath decides how clean it reads.
Explore serviceKitchens and food spaces with hot washdowns need urethane cement, a tough cement-based coating, so we plan its thickness, drains and edges around that heat.
Explore serviceWhen your slab is sound, we grind and polish the concrete itself to the sheen you pick, with no coating on top that could peel later.
Explore serviceStain soaks into the concrete for its color, so old sealers and glue have to come off first or the color comes out blotchy.
Explore serviceWe restore and install terrazzo, the chip-and-binder floor found in plenty of older South Florida homes, and the plan starts with the cracks already there.
Explore serviceFew homes here have basements, so this covers low rooms and slabs where moisture keeps coming up, and we test first, then pick a moisture-tolerant system.
Explore serviceThis is the part you don't see, where we grind off old coatings and laitance, the weak chalky top layer, so the new floor actually bonds.
Explore serviceA clear sealer keeps water, oil and sun off bare concrete on driveways and patios, and how porous your slab is decides which sealer we use.
Explore serviceWhen a patio or slab is worn, pitted or stained but still solid underneath, we lay a thin overlay over it instead of tearing it out.
Explore serviceIf a slab dips or slopes where it shouldn't, self-leveling underlayment flattens it out, so tile, vinyl or a coating sits flat on top.
Explore servicePool decks here take sun, chlorine and summer storms, so we repair the cracks first, then resurface or coat with a slip-resistant finish.
Explore serviceBefore anything new goes down, we take off old epoxy, paint, tile glue or carpet adhesive, because a coating only holds as well as what's under it.
Explore serviceBefore we put you on the schedule, we check which office covers your address, because that decides whether your floor needs a permit or other approval. If it does, we handle the application and tell you what you need to sign, and the start date waits on that approval. We're fully licensed and insured, and you're welcome to ask us for proof before any work starts.
Price comes down to the size of the floor, how much old paint, sealer or glue has to come off, how many cracks and low spots need fixing and which coating system you choose. The schedule turns on how the slab tests and, for patios and pool decks, on the weather. I come out, look at the floor and test the slab myself, and that's where you get your own number. We do the same work in The Hammocks and back home in Country Walk, so the slabs here don't surprise us.
Send a few lines about your garage, patio, pool deck or shop floor, and we'll reply within one business day to set a time. I come out, look at the floor and test the slab myself, and the quote is free with no obligation.
(786) 733-0104June is when regular rain shapes outdoor work, with a nearby weather station listing normal rainfall of .28 to .32 inches for each June day. Those are long-term normals from that station, not readings taken in The Crossings itself, but they're why we plan pool decks and patios around wet afternoons. We check the slab for moisture right before we coat and move the day if the concrete is wet.
No, but the heat changes how we work. That same nearby station lists a normal high of 92 degrees for most of August, easing to 91 for the last few days, and in that heat epoxy sets faster in the bucket and on the floor. We start early, mix smaller batches and keep the garage shaded where we can.
I test it myself when I come out, mainly for moisture coming up through the concrete and for whatever is already on the surface. If it isn't ready, I'll tell you what it needs, whether that's stripping, grinding, crack repair or waiting, because I'd rather say that than coat it and hope.
Besides The Crossings, we work across the cities around Country Walk in Miami-Dade County, including the ones listed here. If you don't see yours, call and ask.
A call to (786) 733-0104 gets your slab tested before you choose a coating, so you don't pay for a system your floor can't hold.
If you're weighing a new floor for your garage, patio or shop, call us or send the form and we'll talk it through.
Tell us about your project
